maxi cosi car seat holder UPPAbaby VISTA/CRUZ Adapter for Maxi-Cosi/Nuna/Cybex Infant Car Seat
SKU: 28811442432
maxi cosi car seat holder

maxi cosi car seat holder UPPAbaby VISTA/CRUZ Adapter for Maxi-Cosi/Nuna/Cybex Infant Car Seat

$20.66 $22.95
Save 10%
No.2 Bestseller on acis.site >

Pay in installments of $5.74 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 2 - Jul 7

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

maxi cosi car seat holder UPPAbaby VISTA/CRUZ Adapter for Maxi-Cosi/Nuna/Cybex Infant Car SeatThis set of UPPAbaby adapters allows you to fit a Maxi Cosi, Nuna or Cybex infant car seat to the frame of your VISTA or CRUZ stroller. Simply snap your infant car seat into these adapters and youre ready to stroll. This convenient adapter will take baby from the car to the road! This redesigned adapter is taller to bring baby closer to you in the UPPAbaby VISTA or CRUZ single strollers. When using the UPPAbaby VISTA as a double, this car seat adapter

This set of UPPAbaby adapters allows you to fit a Maxi-Cosi®, Nuna® or Cybex infant car seat to the frame of your VISTA or CRUZ stroller. Simply snap your infant car seat into these adapters and you’re ready to stroll. This convenient adapter will take baby from the car to the road!

This redesigned adapter is taller to bring baby closer to you in the UPPAbaby VISTA or CRUZ single strollers. When using the UPPAbaby VISTA as a double, this car seat adapter eliminates the need for a separate Upper Adapter—serving to both connect your car seat and create the necessary space to use the car seat in the upper position.

  • Compatible with:
    • Maxi-Cosi® Mico NXT, Mico Max Plus
    • Nuna® PIPA™ Aire Rx, Nuna® PIPA™, PIPA lite, PIPA lite lx, PIPA lite r, PIPA rx, PIPA lite rx, PIPA urbn
    • Cybex Aton, Aton 2, Aton Q, Aton M
    • Clek Liing
  • Single set of adapters creates more space between your primary and secondary seats for the VISTA double stroller
  • Redesigned to eliminate the need of VISTA Upper Adapter in double mode
  • Color-coded indicators to ensure proper installment
  • Quick, no-tools attachment
  • Stroller folds with the adapters on

For CRUZ / CRUZ V2 / CRUZ V3 and VISTA (2015-2019) / VISTA V2, VISTA V3 (upper position)

    Shipping Notes
    • Free Standard Shipping on $100+ Orders to the USA.
    • Except Preorder products are shipped in 48 hours.
    • Delivery to the USA:
    1. Standard Shipping : 3-10 business days
    • If time is of the essence, please consider selecting expedited delivery for faster service.
    Exchange/Return Notes
    • We offer a 30-day return/exchange service after receiving.
    • Final sale items are not eligible for returns or exchanges.
    • To process your return/exchange, please contact us at [email protected]
    • Please click here for more details>>> Return & Exchange Policy
    SKU: 28811442432

    Discover Niche Categories That Outsell maxi cosi car seat holder

    Top-Converting Item to Boost Your Average Order

    4.7 ★★★★★
    Based on 1248 reviews
    Sort
    Highest Rating
    Newest First
    Oldest First
    Product Reviews
    R
    Verified Purchase
    rkruz
    Los Angeles, US
    ★★★★★ 4
    Easy Install Onto Jeep JKU, No Switch Backlight or Mounting Holes, Great Customer Service
    Color: 5in Cube LED Pod, Color: 5in Cube LED Pod
    I installed the Auxbeam 5" 168W LED Cube Pods onto my Jeep JKU Anniversary Steel Bumper. It was an easy install with some YouTube videos to help me snake the cables into the cab. The unused holes in the steel bumper were the perfect size to fit the mounting bolts on the pod lights, and there was plenty of room to reach under the top edge of the bumper to install the nuts with some Loctite. To snake the provided cable through the firewall, I had to remove the installed socket. This was easy to do by simply recessing the retainer clip on each pin, taking a picture of the wired connector before releasing the wires so I knew how to reassemble, snaking the connectorless cable through the firewall into the cab where the pins were then reinserted and locked into the connector. I dressed the cable by zip tie to the existing wire harness at the top of the engine bay. In the cab, I pulled the side panel from the dash (driver's side) and made a small hole for the cable in the panel. After cleaning the dash with alcohol, the adhesive-backed switch seems to hold nicely in place. The lights were very bright and did a great job of illuminating the front and sides of the trail ahead of me. No backlight on the switch, which is a necessity, and I dont understand why that feature is not present. Also, there is no through hole to mount as the adhesive back won't stay attached, so the lack of a mounting hole is a big negative as well. 5 Month UPDATE: One of the lights got water inside. I noticed two screws that hold the glass cover were loose on the bottom of both sides. The other light also had the same loose screws but no water under the glass. I contacted Auxbeam, and they replaced the entire set in 2 days. Very awesome customer service.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on December 25, 2023
    K
    Verified Purchase
    Kevin Sanguansukdikosol
    Massapequa, US
    ★★★★★ 5
    Brightness and quality
    Color: 4*2.5in Cube LED Pod
    Got this for my 2024 Crosstrek. Got this one specifically due to its functionality that I wanted, quality for the price and it looks great especially DRL. I leave the Amber cover on most of the time. If you want the DRL to be on while the car is on, you can do that but it has to be rewired which I did. Love the brightness. I’ve been having this on my Crosstrek for a few months now and have no issues.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on March 3, 2026
    T
    Verified Purchase
    Thomas Chapman
    Chelsea, US
    ★★★★★ 5
    Bright lights
    Color: 4*2.5in Cube LED Pod
    Installed these on my Bronco as ditch lights. Very bright light and I like that you can have them be white or put the cover on them for and amber light look. Took about 30 minutes to install and wire to the upfitter switches. They shoot a wide angle covering your blind spots on dark roads. I got these to replace a three inch ditch light. They're made from heavy duty metal and stand up to the extreme weather. I like them so much that I purchased the seven inch lights and install them on the front bumper. For what they cost it was a price that I couldn't pass up. I highly recommend these lights.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on January 17, 2026
    A
    Verified Purchase
    Abraham Hazim
    Belleville, US
    ★★★★★ 5
    Great product
    Color: 4*2.5in Cube LED Pod, Color: 4*2.5in Cube LED Pod
    Great lighting and beautiful design!!!!!
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on April 18, 2026
    M
    Verified Purchase
    MARS2025
    Port Orchard, US
    ★★★★★ 5
    Power wire to locate LED lamps on carports
    Size: 16AWG-100FT
    Using this to provide power to LEDS on my Carports. A power supply and supply timer also. Doing a wonderful job providing quality lighting at a convenient cost factor. I have multiple LUMEN lamps all on a string working great.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on May 6, 2026

    recommand products

    Dillen 4" Round Pot HARD GOOD / 12 each / NA
    25.98
    Clay Pot
    25.71
    Monterey Garden Insect Spray Spinosad 1 Quart
    27.96
    ARTKETTY Succulent Pots
    25.28
    8'' Clay Pot / Saucer
    28.86